Pallet Racking Parts

Pallet Rack Decks and Beams

Light, regular and heavy duty beam configurations available in 36" 991.44 cm), 48" (121.92 cm),, 60" (152.40 cm), 84" (213.36) 96" 243.84 cm), 108" (274.32), 120" (304.80 cm), 132" (335.28) and 144" (365.76 cm).  Decking available in unfinished 2" 95.08 cm) dimensional lumber, high density particle board, or wire grid.


Pallet Rack Uprights

All Pallet Rack frames feature welded footplates, 2" on center beam adjustment, size availability to 48" wide and 192" high. Sahara or Blue-Gray are standard colors. Frame size should be chosen to allow a minimum pallet overhang of 2" front and 2" rear


Pallet Rack Beams and Supports

Pallet Rack Beams & Supports

Pallet Rack Beams are available in three heights for differing load capacities and feature choice of step depths to accommodate either 5/8" particle board decks or 2" dimensional lumber decking.

Beams are slotted in the step to accept the correct number of deck supports under decking.


Pallet Rack Supports

Deck Supports are formed heavy gauge steel with tabs which fit into beam slots, providing support for regular duty decking or to tie beams together to prevent rotation of beams where heavy duty decking is used.


Pallet Rack Grid Decks

Pallet Rack Grid Decks


Pallet Rack Wood Decks

Pallet Rack Wood DecksPallet Rack Wood Decks

Economical 5/8" high density particle board for lighter loads or to prevent merchandise from falling. Not recommended where heavy pallets “scrape” the surface. Sealed decks have baked-on polymer wax finish to seal surface.

Unfinished 2" dimensional lumber provides high load capacity. Use with ‘-2’ style beams only. Order by frame depth.


Pallet Rack Wall Mount

Pallet Rack Wall Mount

The Pallet Rack Wall Mount Bracket, available in depths of 6", 8", 10" and 12", provides consistent spacing from frame to wall. Hardware pack includes bolts to secure the bracket to the frame.

This bracket is not recommended for use when local codes require seismic calculations.


Pallet Rack Leveling Shims

Pallet Rack Leveling Shims

Available in 10 packs consisting of five 12 gauge and five 16 gauge shims for use in leveling pallet rack systems.


Pallet Rack Lock

Pallet Rack Locking

Pallet racking integral locking beams and angle floor anchors maintain stability and reduce the chances of possible disengagement.


Pallet Rack Floor Anchors

Pallet Rack Floor Anchors

Designed to meet the needs of most county permit codes. Check your local permit condes, site application to determin your needs.